Making a pressure washer with a number of tools and the right knowledge is actually possible? Let’s find out how to make a pressure washer at home here!
There’s a wide selection of cleaning materials available anywhere nowadays. Also, many cleaning solutions have made their way in the market to cater to the cleaning needs of customers. While mild cleaning can be done by combining a pressure washer nozzle to a hose to make a pressure cleaning effect, many have the urge to purchase a pressure washer to clean surfaces more thoroughly.
However, instead of spending cash on a new pressure washer, you can actually create your own! There are some things you need to take into consideration such as the amount of pressure, the water pressure output, the power of your pressure washer, and how big or small your pressure washer will be. Without further ado, here are 7 steps you can follow on how to make a pressure washer on your own:
Contents
How To Make a Pressure Washer (7 Easy Steps)
1st Step:
Buy the required tools and equipment such as screws bolt, nozzle, hose, compressor, and a portable water tank. You must choose a frame that suits your desired area wherein you should use the pressure washer. Take into consideration the motor that you will use; it must support the pressure water tank’s weight and the water hose if you opt to use one.
2nd Step:
Once you have gathered all the required materials, the next step is to put the base of the frame that you have chosen. Make sure to center the motor to the base by securely fastening the motor with utility bolts and screws.
3rd Step:
After that, put the water and air tanks to the back of the base of the frame while securing their positions with bolts. Attach the water hose of your garden to the socket of your water tank. Make sure not to leave any gaps as water will surely leak out of the socket and pressure won’t be maintained.
4th Step:
Next is to connect the air and water tank to the water pump. Don’t forget to put plumbing tapes to each socket to make certain sure air and water can’t escape. Attach the assembly to the pressure hose. Your pressure hose must withstand the pressure generated by your water and air tanks to provide adequate water pressure.
5th Step:
Whether you’ve chosen to build a gas or electric-powered motor for your pressure washer, always make sure that the motor is always turned off. Electrocution is a very serious hazard that you should take into account – and the one hazard you must prevent at all times.
6th Step:
Check if you have enough fuel if you chose to make a gas-powered motor and fill the tank if it is empty. For electric-powered variants, make sure to check the outlet to guarantee that it is working. Always make sure that the extension outlet is far away from the water source to prevent any short circuit interruptions.
7th Step:
Finally, check if your pressure washer is working properly. Completely fill the tanks, double-check all the hose connections, and make sure that everything is secure. After that, turn on the pressure washer.
Remove any breakable objects near the testing area where you want to test your pressure washer. To ensure that the pressure washer is working correctly, let it run for one to two minutes and test the flow of water from the nozzle. Utilize the trigger of the nozzle and adjust or twist the hose nozzle to change the flow of pressure to your desired flow.
Conclusion
Learning how to make a pressure washer is not as hard as you might think. However, before you even proceed, make sure to read and follow the instructions and use only the recommended tools and equipment to prevent any damage or accidents to both you and the area or object you want to clean.
By doing so, you can make sure that your pressure washer won’t be needing frequent repairs and maintenance. With the right amount of water pressure and the right choice of pressure washer detergent, cleaning anything with your pressure washer can be a walk in the park.