For those who have motion sensor lights that are not working optimally, then this guide will let you know how to reset outdoor motion sensor lights.
If you see your outdoor motion sensor lights not working optimally, you will need to find a way to look at the problem. Learning how to reset outdoor motion sensor lights is vital as most issues, if not all, can already be solved just by resetting it. But before we discuss the actual resetting process, let’s first discuss some of the key types of motion sensor lights that may need resetting.
Outdoor Motion Sensor Switch
This switch can be used to automatically turn on the lights whenever someone is around. Normally, these are installed indoors, but the outdoor version can work for the backyard.
For faulty ones, replace the circuit of the light that will be used by the sensor switch. Turn off the circuit breaker before doing this. To make sure there is no power flowing through the wires, use a circuit tester. Once that is secured, connect the wires to the new switch and see how it works. This can be useful in making sure that the lights are properly turned on.
Motion Sensor Ceiling Light
The ceiling light is best installed at a garage or a patio for better visibility. It has a 360-degree range, and some models can go as far as 30 feet. They also have a dusk-to-dawn feature, which can be turned off during the day. A motion detector light bulb is a worthwhile addition to any home.
Defiant Motion Security Light
This kind of light has a 180-degree motion sensor and a range of up to 70 feet. This can be installed in walls or eaves for better visibility and use defiant lighting.
Resetting the Lights
Learning how to reset outdoor motion sensor lights is easy. While there are different types of motion sensor lights such as the ones provided above, resetting them usually can be done with just a few steps.
All you will have to do is turn off the circuit breaker, which powers the device. You will then need to wait for 30 seconds before you can turn it back on. This will reset the cycle for the device and restore the settings to normal.
In some models, though, it can be resetted after an hour or so. If the switch is located on a wall, you can flick it on and off every two seconds. Do this about four times until you see the light turn on. This will restore the light settings to normal.
These solutions should be tried out before actually resetting the sensor.
- Check if the wiring is properly set.
- Clean up any dirt that has clogged on the sensor. Use a damp cloth to clear the dirt as it can reduce its accuracy in detecting motion. Cleaning the sensor itself is necessary to see if it is in working order.
- Check the positioning of the lights to determine if it is functioning properly after being cleaned. The sensor might be off due to it facing the ground. If it is frequently on, this may be because the sensor has detected more movement recently. This happens when the sensor is directed at a road, where it can spot cars and people passing by but not entering the house.
- Adjusting the sensor settings are also necessary. It has a range and timer setting that helps set its sensitivity and the time it stays on. The switch can help reduce the range to ensure that it is not too sensitive to movement outside the house. The timer setting should be at least one to two minutes so that it does not use up much power.